DCM Contact us

DCM obtains ASME “S” & “U” Certificates of Authorization for Power boilers and Pressure Vessels.

READ THE OFFICIAL RELEASE
View all projects Open gallery

Saint John, New Brunswick, Canada

Canaport LNG – Gas liquefaction Process Unit

SNC-Lavalin awarded DCM the mandate to provide mechanical, piping, electrical and instrumentation services for the Canaport LNG Gas liquefaction Process Unit.

Scope

Mechanical, Piping, Electrical & Instrumentation

Industry sector

Oil & Gas

Canaport LNG is a state-of-the-art liquefied natural gas (LNG) receiving and re-gasification terminal in Saint John (N.B.) and is the first LNG terminal in Canada, sending out natural gas to both Canadian and US markets. The Canaport LNG Terminal added a boil-off gas (BOG) recovery system to its existing facility. Project included the installation of a new BOG compressor (identical to the three existing BOG compressors in the terminal) and a booster compressor to compress the boil-off gas from the liquefied natural gas (LNG) storage tanks directly to the new pipeline network.

DCM’s mandate

Our mandate included:

  • The installation of over 28,000 feet of specialty stainless steel process piping in the re-gasification units.
  • This included the development and implementation of various cryogenic welding procedures requiring
    extensive technical knowledge and quality.
  • In relation with the installation of the BOG Recovery unit and Booster pump, DCM also completed all
    work related to the:

    • Instrumentation calibration / installation / testing
    • Communication cabling installation / testing

Cryogenic piping fabrication & installation

Scope of work:

Supply manpower, supervision personnel, handling and rolling equipments for materials transportation, piping materials, tools / welding equipment, scaffolding, buildings / shelters / temporary installations, and technicians / equipment for non-destructive / pressure tests and insulation work.

More specifically, the work included: 

  • Pre-fabricating and pre-insulating stainless steel piping
  • Field installation of all piping routes
  • Installation of all valves, screens, and in-line instruments
  • Fabrication and installation all pipe supports
  • Non-Destructive Examination (NDE) in conformity with all the technical documents
  • Pressure testing of the Water Carbon Steel lines and Stainless Lines
  • Backwelding of plugs that must be installed on couplings (BE x MNPT) present in this contract piping and situated at high point vents used for pressure tests only, as applicable

Instrumentation & electrical installation

Scope of work:

DCM general scope of work included the installation of all new instruments / cables / junction boxes and testing thereof. It also included the supply of all labour expertise, labour supervision, and multi-trades labourers. DCM also supplied the facilities, the tools, the materials, the equipment and all the construction machinery for the execution of the work.

More specifically, the work included: 

  • Purchase, supply, install and test all cabling
  • Install all instruments (with cable supports and trays), panels and junction boxes
  • Supply, install and connect all instrument air supplies (including supports)
  • Supply and install panel supports (including fire and gas equipment supports)
  • Supply and install all grounds, marshalling panels (including mounting rails), and hardware such as terminals, nameplates, selector switches and pilot lights
  • Perform quality control

Telecom supply & installation

Scope of work:

The scope of work included the supply and the installation of all the telecommunication and physical security equipment for the Canaport LNG-BOG Recovery System.

More specifically, the work included:

  • Supply and install all the structured cabling equipment and telecommunication equipment
  • Install fibre-optic and cabling copper patch panel
  • Perform all telecommunication cable termination and connectors
  • Supply, install and terminate all the telecommunication cables
  • Test all the new telecommunication cabling as per the specifications
  • Supply and install all the required cable glands for all the telecommunication cables

Discover some of our related experience

Relationships we have built

ThyssenKrupp Viterra SNC Lavalin Tecnicas Reunidas Canada

Contact Us

Find out more about DCM

Integrated industrial and commercial construction services at your fingertips. Send us a message and a representative will get back to you.

View all contact informations

Thank you for your message.

Error